Can Digitalization Take the Pressure Off the Water Industry?

Posted by aclimaadmin | noviembre 19, 2020 | Noticias del Sector

By combining smart monitoring technology with drives and motors, water utility operators can secure pre-emptive asset management optimization and, in the process, drive a significant shift from reactive to real-time monitoring.

Traditional water and wastewater utility systems weren’t built for the dramatically changing stresses of climate change and rapid urbanization. Therefore, the risk that aging infrastructure brings — both in terms of potential failure and poor environmental compliance — is a key concern for water utilities around the world.

There is increasing pressure on utility companies to lower their total cost of ownership and high leakage rates. The rapid development of real-time sensing and monitoring technologies for improving early leakage and water quality anomaly detection are an effective way to address these challenges. By combining smart monitoring technology with drives and motors, water utility operators can secure preemptive asset management optimization and, in the process, drive a significant shift from reactive to real-time monitoring.

Condition-Based Monitoring

Nearly a third of all electric motors in the world are driven by variable speed drives (VSDs), mainly to reduce energy use. However, there are other reasons for employing drives in water and wastewater applications, including process control (keeping constant water pressure, thus avoiding leakage caused by high pressure), avoiding water hammer, or optimized well exploitation. Drives can perform pump cleaning in wastewater applications and control several pumps in a cascade system in water pumping applications to optimize pump operations and save energy.

Condition-based monitoring services can work alongside all these water automation products to gain access to real-time data via the cloud from remotely located water assets. At the heart of this approach is a new generation of wireless smart sensors.

Smart sensors have revolutionized the maintenance logistics of motors by enabling operators to use remote monitoring for early detection of incipient problems. Now, maintenance actions can be managed cost-effectively, before functional failure occurs. The result is reduced downtime, eliminating unexpected production stops, optimized maintenance, and reduced spare parts stock.

With built-in intelligence for live, adaptive behavior, the technology assists in managing the effects of extreme weather conditions such as excess rainfall that poses problems from water quality to environmental compliance.

Furthermore, a digital solution allows experts to analyze data collected from the sensors and turn it into corrective and confident actions to extend equipment lifetime. It’s possible to analyze and decipher the best solution for improving the operation of water and wastewater assets from a single pump station to an entire water or wastewater treatment facility.

Digitalization also extends to variable speed drives (VSDs). Drive data can be uploaded to the cloud via a remote monitoring solution. This allows data from the drive, motor, and pump to be analyzed together, providing insights on the health and performance of the complete power train.

While water companies are always monitoring their networks for changes in pipe pressures and flow of water (that can indicate problems such as blockages and leakages), sometimes the first warning they receive is when a customer notifies them of a burst water pipe. Digitalization can trigger the earliest possible warning. The earlier or quicker utilities can prevent the waste of treated water, the higher the savings, not to mention the boost in customer confidence. Wastewater leaks are also problematic, as utilities can be fined for releasing contaminants into the environment, not to mention the safety hazards for people, property, and impact on the image of a water utility.

How Hard is Digitalization to Implement?

The water utility sector has made great strides in the uptake of digital technology. However, there is still plenty of room for improvement. And because technology has evolved, and the prices of smart devices have decreased, it’s possible to take a great leap forward to achieve a true digital transformation with minimal investment

Ripping out all the existing hardware is probably not the best approach. Utilities need to start with a clear strategic plan to create a full ecosystem. This can start by dividing the water network into discrete zones and identifying what is needed to address the specific challenges in each. Effectively, it is best to start small by adding to existing technology. In this sense, smart sensors are the perfect starting point as they can be placed on a motor, pump, bearings or gearing. They are easy to connect and use, without having to invest in new, expensive systems.

Successful Application in Singapore

In the bustling city-state of Singapore, its water utility, PUB Singapore, focuses on one main goal: to make sure that the rapidly growing metropolis — with few natural water sources and limited landmass — has a steady supply of clean water. To add to the challenge, water demand is set to double in the next four decades over its current consumption of over 400 million gallons a day. High operational costs, rising energy usage, and a national workforce shortage compelled Singapore to think beyond convention.

ABB and PUB conducted a successful pilot, which involved installing smart sensors on PUB’s motors and pumps. The real-time data obtained via the sensors allowed the utility to reduce troubleshooting time as well as resources and paperwork.

ABB then installed an integrated solution with 22 smart sensors, remote condition monitoring, and Microsoft HoloLens augmented reality glasses to assist with maintenance and training. It also installed six digital power trains, which integrate sensor and drive data with cloud-based analytics along the entire chain of plant equipment — from drives and motors to pumps and bearings. The condition monitoring portal allows PUB to configure the power trains easily and monitor critical health and operating parameters via a single portal. The digital power trains, in turn, alert the utility to warning signs of failure, which helps reduce maintenance costs.

Looking Ahead

A smart city is often described as a “system of systems,” where the Internet of Things (IoT) and analytics converge with traditional infrastructure. These cities use IoT and analytics capabilities to reach operational efficiency and improve service levels, sustainability, and economic vitality. Previously siloed sectors such as power, transport, disaster management, and water all work in sync.

Many cities around the world have made great strides in digitizing several areas of infrastructure, such as energy and transport. Now is the time to connect water supplies to these smart city strategies and systems to realize the benefits of smart water management.

Fuente: WaterWorld

Add a comment

*Please complete all fields correctly

Posts Relaccionados

Posted by aclimaadmin | 07 diciembre 2022
El Departamento de Desarrollo Económico, Sostenibilidad y Medio Ambiente del Gobierno Vasco destinará 100.000 euros en ayudas a la gestión medioambiental adecuada, por medio de acuerdos de custodia en la...
Posted by aclimaadmin | 07 diciembre 2022
La descarbonización de la industria vasca contará a partir de ahora con la experiencia de EPRI, (Instituto de Investigación de Energía de Estados Unidos), gracias al acuerdo alcanzado con el...
Posted by aclimaadmin | 07 diciembre 2022
El director ejecutivo de la International Water Association (IWA), Kalanithy Vairamoorthy, ha comunicado hoy que Bilbao y Bizkaia serán sede permanente de sus congresos y cumbres sobre digitalización del agua. Este anuncio se...